Switching On And Off - Dometic TravelPower Instrucciones De Uso

All manuals and user guides at all-guides.com
Control Panel
7.1

Switching on and off

!
WARNING!
Before you start the power box via the control panel, ensure
 that all devices not intended for operation are either switched
off or not connected,
 that the motor is running,
 that the electrical power requirement corresponds with the
nominal output power of the power box and the generator
 that the generator speed corresponds with the electrical power
requirement
➤ Press the red "ON/OFF" button (fig. 1 5, page 3).
✓ The control panel is switched on or off.
✓ The power box is in standby mode.
➤ Press the green button "START/STANDBY" (fig. 1 4, page 3) for 4 sec-
onds.
✓ The power box is switched on or moved into standby mode.
7.2 Showing values on the display
When switching on the remote control, the first of a total of two display pages
automatically appears.
The following values are always shown on the display:
 output voltage AC
 output current AC
 output power AC
The first display page provides both the values for the speed of the generator
in 1/min and the temperature.
The second display page provides values for the battery voltage (DC) and
working hours.
➤ Press the green button "START/STANDBY" (fig. 1 4, page 3) for 1 sec-
ond to move from the first page to the second and visa versa.
The "ALARM" page automatically appears as soon as there is a fault.
EN
Using the control panel
9