1. Function buttons
On the LCD display, press the corresponding function button to
perform different functions.
2. LCD display
When the power station is turned on, the display automatically
lights up to show the current battery level. It will automatically turn
off if no button is pressed within 30 seconds.
3. Power button
Press and hold the power button for about 3 seconds to turn on/
off the power station.
4. LED light
Press the corresponding function button on the main interface of
the display to turn on/off the LED light.
5. DC input port (8mm)
Connect the car charge or solar charge cable to this port to charge
the power station.
6. Anderson input port
Connect the Anderson connector of the solar charge cable to this
port to charge the power station.
7. AC output port
Supply power to devices with rated power less than 1200W.
8. AC output indicator
When AC output is enabled, the indicator turns on.
9. AC output switch
When the power station is turned on, press this switch to turn on/
off the AC output.
10. Quick charge USB-A output port
Applicable to devices charged through USB-A port, and supports
up to 18W quick charge.
Devices connected to this port that do not support quick charge
are still charged at standard speed.
11. Type-C output port (PD 60W)
Applicable to devices charged through Type-C port, and supports
up to 60W quick charge.
Devices connected to this port that do not support quick charge
are still charged at standard speed.
12. 5521 output port
Applicable to devices charged through 5521 port.
13. Car port
Applicable to general car electrical appliances, with a maximum
output current of 10A.
14. DC output indicator
When DC output is enabled, the indicator turns on.
15. DC output switch
When the power station is turned on, press this switch to turn on/
off the DC output.
16. Type-C output port (PD 18W)
Applicable to devices charged through Type-C port, and supports
up to 18W quick charge.
Non-quick charge enabled devices connected to this port will
charge at normal speed.
04