Descargar Imprimir esta página

Gerber MAXWELL 0040143 Instrucciones De Montaje

Publicidad

Enlaces rápidos

DECORATIVE FINISHES:
The use of 100% non-abrasive wax, such as TURTLEWAXT-15 applied with
a 100% cotton cloth, will clean and brighten the surfaces and provide protec-
htion for easier cleaning.
With proper care, your new GERBER product will give you years of trouble
free service and enjoyment. Use only 100% cotton cloth dampened with water
to clean.
DO NOT use detergents, cleaners or other abrasive materials as they may
damage the finish and void the warranty.
ACABADOS DECRORATIVOS:
El uso de ceras 100% no abrasivas, tal como la CERA DE TORTUGA T –15
aplicada con un paño de algodon, limpiara y dara brillo a las superficies y
dara protection para que la limpieza sea mas facil.
Si le das el cuidado apropiado, tu nuevo producto GERBER te dara muchos
anos de servicio sin problemas. Limpialo solo con paños humedecidos que
sean 100% de algodon.
NO usar detergentes, limpiadores u otros materiales abrasivos ya que pueden
danar el acabado y anular la garantia.
APPRÊT DÉCORATIF:
Pour u nettoyage facile et des surfaces qui brillent, appliquez, à l'aide d'un
tissu 100% coton, une cire 100% non abrasive telle que la TURTLE WAX
T-15. Cette cire assurera une protection qui facilitera le nettoyage.
Avec les soins adéquats, votre nouveau produit GERBER ne vous causera
aucun souci et vous donnera satisfaction pendant de nombreuses années.
Pour le nettoyage, n'utiliser qu'un tissu 100% coton, légèrement humide.
NE PAS utiliser de détergents, de nettoyeurs ou autres matières abrasives
car ces produits pourraient endommager le fini et annuler la garantie.
Series: 0040143
4" LAVATORY
FITTING
PREPARATION INSTRUCTIONS-
-Shut off water supply.
-If replacing an existing fixture, remove
old fitting.
-Clean sink mounting surfaces for your
new fitting.
CHECK CARTON FOR THE FOLLOWING-
-A 4" lavatory faucet.
-Plastic bag with 2 locknuts and 2 supply nuts.
-A pop-up rod and extension assembly.
-A drain (tee) assembly.
by Gerber
0040144
0040145
}
Faucets
with
Drains
only

Publicidad

loading

Resumen de contenidos para Gerber MAXWELL 0040143

  • Página 1 100% cotton cloth, will clean and brighten the surfaces and provide protec- htion for easier cleaning. FITTING With proper care, your new GERBER product will give you years of trouble free service and enjoyment. Use only 100% cotton cloth dampened with water to clean.
  • Página 2 (I) INSTALLING THE FAUCET: • Remove faucet body from the carton. • Apply putty or other sealant to the bottom surface of the fitting. • Install faucet through the mounting holes. • Finger tighten the synthetic locknuts over the supply stems.
  • Página 3 • Insert tailpiece into a P-trap/drain and secure with trap nut. • Check for leaks at all fittings. PROFESSIONALLY MADE. PROFESSIONALLY SOLD. PROFESSIONALLY INSALLED. Gerber Plumbing Fixtures LLC., www.Gerberonline.com...
  • Página 4 French (I) POUR INSTALLER LE ROBINET: - Sortir le robinet de l’emballage. - Étendre du mastic ou autre potée sur le dessous du robinet. - Glisser le robinet entre les trous de fixation. - Serrer légèrement à la main les contre-écrous sur les tuyaux du robinet - Aligner le robnet à...

Este manual también es adecuado para:

Maxwell 0040144Maxwell 0040145