Getting Started - XtremeMac InCharge Mobile Guia Del Usuario

gettIng started

InCharge Mobile can be used right out of the package, but
for best results it is recommended that you fully charge the
internal battery. Please see "Charging InCharge Mobile" for
further instructions.
Battery configuration:
1. Battery pack
2. Battery status indicators
3. Battery status button
4. On/off switch
5. Micro-USB jack
6. Removable cap
7. Viewing stand
8. iPhone Connector
7
6
4
IPP-IM4-XX_user_guide_23951083C.indd 4-5
All manuals and user guides at all-guides.com
1
2
5
4
3
8
Incharge mobIle ProvIdes uP to the
followIng addItIonal hours: *
Talk Time
Up to 7 hours on 3G
Up to 14 hours on 2G
Internet Use
Up to 6 hours on 3G
Up to 10 hours on wi-fi
Audio Playback
Up to 40 hours
Video Playback
Up to 10 hours
Standby Time
Up to 300 hours
* Additional hours will vary with device usage
usIng Incharge mobIle to charge/Power
your IPhone 4
1. Remove any case or accessory that may be on or
connected to your iPhone.
2. Remove the cap on InCharge Mobile and slide the iPhone
into the battery pack until the bottom of the iPhone is
connected to the dock connector.
3. Switch the button on the bottom of the unit to "on" to
turn on the battery pack. The battery symbol on the
iPhone will appear and the LED status indicators on the
back of the unit will illuminate for 2 seconds to show
level of charge.
4. Slide InCharge Mobile's cap over the top of the iPhone
until it locks into place with the battery pack. Your
iPhone will operate normally.
Note: If your device is fully charged, InCharge Mobile will start
supplying power from its internal battery first to preserve the
battery on your device.
5 5
10/4/10 4:19 PM