Formula 1 IW220 Manual De Uso Original página 14

GB
Electrical safety
•
The power tool's mains plug must fit the
socket. Do not modify the plug in any way. Do
not use any adapter plugs in combination with
earthed power tools. Unmodified plugs and
proper power outlet reduce the risk of electric
shock.
•
Avoid physical contact with earthed surfaces
such as pipes, heating systems, cookers and
refrigerators. There is a higher risk of electric
shock if your body is earthed.
•
Always keep power tools away from rain or
moisture. There is a higher risk of electric shock
if water enters the power tool.
•
Do not misuse the power cable to carry, hang
or unplug the power tool. Keep the power cable
away from heat, oil, sharp edges or mov-
ing parts. Damaged or tangled power cables
increase the risk of electric shock.
•
When using a power tool outdoors, only use
extension leads suitable for outdoor use. Using
an extension lead suitable for outdoor use
reduces the risk of electric shock.
•
If the power tool must be used in a damp envi-
ronment, use an earth leakage circuit breaker.
Using an earth leakage circuit breaker reduces
the risk of electric shock.
Safety of persons
•
Be attentive, watch what you are doing and
take the utmost care when working with
power tools. Do not use power tools if you are
tired or under the influence of drugs, alcohol
or medication. One moment of carelessness
when using the power tool can result in serious
injuries.
•
Wear personal protective equipment and
always wear safety goggles. Wearing personal
protective equipment such as dust mask, non-
slip safety shoes, hard hat or hearing protec-
tion, depending on the type of tool and the use,
reduces the risk of injuries.
•
Take measures to prevent accidental starting.
Verify the power tool is switched off before
connecting it to power and/or inserting the
battery pack, picking it up or carrying it. Leaving
your finger on the switch when carrying the
power tool or connecting it to power while it is
switched on may result in accidents.
•
Remove adjusting tools or spanners before
switching on the power tool. Leaving a tool
or spanner in a rotating part of the device can
result in injuries.
14 f1.mts-gruppe.com
•
Avoid unnatural postures. Make sure you are in
a stable standing position and keep your bal-
ance at all times. This gives you better control
over the power tool in unexpected situations.
•
Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught
in moving parts.
•
If dust extractors and collections can be
installed, ensure these are connected and used
properly. Use of a dust extractor system can
reduce the hazards caused by dust.
•
Do not give yourself a false sense of security
and do not ignore safety rules for power tools,
even if you are familiar with the power tool
after many uses. Carelessness can result in
serious injuries within a split second.
Use and care of the power tool
•
Do not cause the device to overload. Use the
power tool intended for the job. You work
better and safer using the proper tool in the
specified performance range.
•
Do not use power tools with a defective switch.
A power tool that can no longer be switched on
or off is dangerous and must be repaired.
•
Unplug from the socket and/or remove a
removable battery pack before adjusting the
device, switching accessories or putting the de-
vice away. This precaution prevents the power
tool from starting accidentally.
•
Keep power tools out of the reach of children
when they are not in use. Do not allow persons
to use the device who is not familiar with it or
has not read these instructions. Power tools
are dangerous when used by inexperienced
persons.
•
Maintain power tools and accessories with
care. Verify moving parts are working properly
without jamming and check for parts which
are broken or damaged in such a way they
affect the proper function of the power tool.
Have damaged parts repaired before using the
device. Many accidents are caused by poorly
maintained power tools.
•
Keep cutting tools sharp and clean. Carefully
maintained tools with sharp cutting edges are
less likely to jam and are easier to guide.
•
Use the power tool, accessories, insertion tools,
etc. according to these instructions. Consider
the working conditions and the work to be