General Warning; Safety Tips; Important Notices - Imaginarium 46709-040709 Manual

This manual contains important safety, performance and
maintenance information. Read the manual carefully before taking
your first ride and keep the manual handy for future reference.
AN IMPORTANT MESSAGE TO PARENTS:
This manual contains important safety information. For the child's safety, it
is your responsibility to review this information with your child and make
sure that the child understands all warnings, cautions, instructions and
safety topics.
We recommend you reread the information in the manual periodically and
that you remind the children. Likewise, we suggest you inspect the scooter
periodically to maintain it in safe conditions for use.
GENERAL WARNING: Scooter riding can be a hazardous
activity even under the best of circumstances. This manual contains many
warnings and cautions concerning the consequences of failing to maintain
or inspect your Baby scooter. Many of the warnings say "you may lose
control or fall." Because any fall can result in serious injury or death, we do
not repeat the warning of possible serious injury or death each time the
risk of falling is mentioned.
Check local laws and regulations to see where you may ride your scooter
legally.
Parts and Components
A. Spring buttons
B. Front wheel
C. Fork
D. Frame
E. Handlebar grip
F. Spring buttons
G. Handlebars
ASSEMBLY
WARNING: If the coupling of the handlebar T-bar is not installed
and tightened correctly, the user could lose control and fall. Assembly
must be performed by an adult with mechanical experience. If you do not
understand these instructions or the concept of "tighten securely" seek the
assistance of a qualified mechanic.
ASSEMBLY INSTRUCTIONS:
A. Slide the T-tube assembly onto the exposed threads of the fork. (Refer
to the below photo A)
B. With the front wheel facing forward and the handlebar perpendicular to
the wheel, tighten the coupling as shown. Tighten it well. (Refer to the
below photo B)
C. Align the spring buttons with the handlebar T-tube openings until the
spring buttons click into place, as shown in photo C.
D. Adjust the height of the handlebar so that the spring buttons line up with
the tube openings using the quick-release coupling. Push the coupling
and close it to set the position of the T-tube. (Refer to the photo D)
A
All manuals and user guides at all-guides.com
H. T-Tube
I. Quick-release coupling
J. Spare wheel
K. Coupling
L. Deck
M. Rear wheel
B
WARNING: Failure to properly engage the spring-loaded buttons
may cause the handlebars to dislodge while riding and may cause you to
lose control and fall. When correctly engaged, the handlebars will not
rotate nor will they move sideways. Note that when properly engaged, the
spring-loaded buttons are clearly visible in the holes on the T-tube as
shown on photo C.
WARNING: If the quick-release coupling is not properly in place,
the T-tube could extend or retract and the child could lose control of the
scooter and fall. When the quick-release coupling is correctly in place, the
handlebar does not move up or down.

SAFETY TIPS

● Do not use the scooter at dusk or at night.
WARNING: Do not ride on wet, slippery surfaces or icy
conditions. You will lose traction and could fall.
● Always wear appropriate protective equipment, such as an approved
helmet. Long sleeve shirt, gloves, long pants, shoes, and elbow and
knee pads are recommended. Wear athletic shoes (lace-up shoes with
rubber soles). Don't ride barefoot or in sandals.
● Avoid water, speed bumps, sand, gravel, and anything that could cause
you to slip and fall.
● Tighten all bolts, and make sure the cylinder, T-tube extensions, and
handlebars are locked in place before riding.
● Do not modify the scooter in any way.
● Maintain a hold on the handlebars at all times.
● Do not ride in crowded public areas. Please make sure the environment
is safe for riding.
● Do not ride down hills or on any slope at all.
● The scooter supports a maximum weight of 20 kilos.
WARNING: Ride only on smooth hard surfaces. The scooter is
not designed for use on all-terrain surfaces, steep terrain, nor indoors. Use
caution when near curbs, uneven pavement, potholes or similar
conditions.
Maintenance
Keep your scooter clean. Wipe with a damp cloth to remove dust and dirt.

IMPORTANT NOTICES

Read the owner's manual thoroughly prior to assembly.
Be careful not to misplace or lose small parts when unpacking.
Assembly must be performed by an adult with mechanical experience.
Do not allow more than one child to use this product at the same time.
P2
C
D