Getting to know your headlamp
( A ) Main button
( L1 ) Main light
( L2 ) Red light ( 2 x red LED )
1 . Fitting batteries
1a. Check the headlamp is off before opening battery compartment.
1b. Remove old batteries and insert new batteries following the polarity
markings (+) and (−) on the battery compartment.
1c. Close battery compartment.
2 . Operation
2a. Main light - Cool white ( L1 )
Short press (A) to cycle through
light modes
When (L2) is on, press (A)
3 times to switch to (L1)
2b. Red lights ( L2 )
When ( L1 ) is off, long press ( A )
for 2 seconds
When ( L2 ) is on, short press ( A )
2c. Other operations
When ( L1 ) and ( L2 ) are off, long
press ( A ) for >5 seconds
When lock mode activated,
long press ( A ) for >5 seconds
3 . Specifications
Lumen
Candela
Beam distance
Runtime
IP rating
200 lm – 5 lm
Max. 3850 cd
Max. 120 m
7 h – 78 h
I PX6
Main light on: High
Low
Off
Main light on
Red lights on
Flashing red lights
Lock mode activated ( L1 ashes twice )
In lock mode, ( L1 ) ashes momentarily
when ( A ) is pressed.
Lock mode deactivated
( L1 ashes twice )
Impact resistance
Battery
LED
Weight
Dimensions
GB
Medium
Off
1.0 m
Alkaline/NiMH
(3 x AAA)
Cree
&
(White)
Red LED
110g
(with batteries)
46 x 56 x 34 mm