Service Information - Stanley STEL146 Manual

Selecting the direction of rotation (FIG. D)
For drilling and for tightening screws, use forward
(clockwise) rotation. For loosening screws or removing a
jammed drill bit, use reverse (counterclockwise) rotation.
f To select forward rotation, push the forward/reverse
slider (3) to the left.
f To select reverse rotation, push the forward/reverse
slider to the right.
¡Warning! Never change the direction of rotation while
the motor is running.
DRILLING MODEL SELECTOR
f To switch the tool on, press the variable speed switch
(1). The tool speed depends on how far you press
the switch.
f For continuous operation, press the lock-on button
(2) and release the variable speed switch. This option
is available only at full speed.
f To switch the tool off, release the variable speed
switch. To switch the tool off when in continuous
operation, press the variable speed switch once
more and release it.
SWITCHING ON AND OFF
f For drilling in masonry, set the drilling mode selector
(5) to the position. (Fig.F)
f For drilling in other materials, set the drilling mode
selector (5) to the position. (Fig.E)
ACCESSORIES
The performance of your tool depends on the accessory
used. Stanley and Piranha accessories are engineered
tohigh quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
MAINTENANCE
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
¡Warning! Before performing any maintenance, switch
off and unplug the tool.
f Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
f Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
ENGLISH • 9