GP CH46 Manual Del Usuario página 3

Getting to know your headlamp
( A ) Main button
( B ) Motion sensors
( C ) Sensor indicator light (red light)
( L1 ) Main light
1 . Fitting batteries
1a. Check the headlamp is off before opening battery compartment.
1b. Remove old batteries and insert new batteries following the polarity
markings (+) and (−) on the battery compartment.
1c. Close battery compartment.
2 . Operation
2a. Main light - Cool white ( L1 )
Short press ( A ) to cycle through
light modes
When ( L1 ) is on, long press ( A )
for 2 second
When motion sensor mode is
activated, wave hand~5cm in
front ( B ) to cycle through light
modes
When motion sensor mode is
activated, short press ( A )
2b. Other operations
When ( L1 ) is off, long press ( A )
for > 5 seconds
When lock mode activated,
long press ( A ) for > 5 seconds
3 . Specifications
Lumen
Candela
Beam distance
Runtime
IP rating
300 lm – 5 lm
Max. 6200 cd
Max. 157 m
5 h – 69 h
I PX6
Main light on: High
Low Flashing
Motion sensor activated
and ( C ) is on ( L1 ashes once )
Main light on:
High Mid Low
Motion sensor deactivated and
( C ) is off
Lock mode activated ( L1 ashes twice )
In lock mode, ( L1 ) ashes momentarily
when ( A ) is pressed.
Lock mode deactivated
( L1 ashes twice )
Impact resistance
Battery
LED
Weight
Dimensions
GB
Medium
Off
1.0 m
Alkaline/NiMH
( 3 x AAA
)
Cree
110g (with batteries)
46 x 56 x 34 mm