MAINTENANCE
Stop the device by pushing down the switch (OFF position) and take off the shelter.
Press the outer-cutter button and take off the outer cutter. Clean the beards on the outer cutter, the inner cutterand the body (1 time a week)
with the brush supplied. After cleaning , assemble the outer cutter and cover it with the shelter.
Do not clean the appliance when it is charging.
CE (89/336/EEC)EMC
Recommendations:
When disposing of your product at end of life cycle, please comply with
national regulations. Please dispose the device in allocation provided
for this purpose in order to ensure safe and environmentally-friendly
destruction.
7
Don't press the net shelter
Don't prize open the net shelter with a screw driver
Don't charge near a warmer , near or in the mois-
ture or in the direct sunlight, for example in the car
in summer.
RoHS (2002/95/EC) : The product is made with
friendly environmentally materials.
GB