Continuous Measurement - LaserLiner Pocket Pro Manual

All manuals and user guides at all-guides.com
Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
b
f
e
a
8.
7.
6.
!
Do not look directly into the beam. Lasers must be kept out of
reach of children. Never intentionally aim the device at people.

Continuous measurement:

Use the ON/OFF button (5) to turn the device on and press the READ
button (1) for about 4 seconds. The device now measures continuously
and displays the smallest value (min), the largest value (max) and the
current value. Another brief press of the READ button (1) will interrupt
continuous measurement or restart it again.
LaserRangeMaster Pocket Pro
d
c
1.
2.
3.
4.
5.
DISPLAY:
a Measurement point (reference)
rear / tripod / front / pin
b Display length, area / volume /
Pythagoras 1 / Pythagoras 2
c
Measurement values /
Measurement results
Unit m/mm/ft/inch
d Intermediate values / min/max values
e Battery symbol
f min / max measurement
KEYPAD:
1.
Measure / Continuous measurement
2. min / max continuous measurement
3. length, area, volume, Pythagoras
4. Unit of measure m/mm/ft/inch
5. ON/OFF
6. Measurement point (reference)
rear / tripod / front / pin
7.
addition / subtraction of
lengths, areas, volumes
8. delete last measurement values
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2007-10
09
GB