English
F
Tablets or iPad
®
C
F
Mobile phones, smartphones, MP3 players, etc.
D
To begin charging, unlock the Accupack by holding down the
function key (A) for 2 to 3 seconds.
The LEDs on the display (e) will then briefly light up from bottom
•
to top.
The charging process starts automatically.
The LEDs on the display (e) will thereby repeatedly light up from
•
bottom to top. The remaining capacity is shown by the number of
illuminated LEDs.
Hold down the function key (A) for 2 to 3 seconds in order to lock
the Accupack again.
The LEDs on the display (e) light up from top to bottom and then
•
turn off. Any charging in progress will be interrupted.
3. CHARGInG stAtUs DIsPLAY:
The charging status of the Accupack can be read from the LED
display (e).
18
All manuals and user guides at all-guides.com
USB ACCUPACK 7000
ADAPteR
English
1 LED illuminated:
< 20 %
2 LEDs illuminated: 20 %–40 %
3 LEDs illuminated: 40 %–60 %
4 LEDs illuminated: 60 %–80 %
5 LEDs illuminated: 80 %–100 %
4. MAIntenAnCe
To maintain the full capacity of the Accupack, please follow
instructions below:
1. Recharge the Accupack every 3 months if you are not using it.
2. Keep the Accupack dry and avoid contact with corrosive or
volatile liquids.
3. Use a clean, dry cloth for cleaning. Do not use any solvent-based
cleaners, soaps or chemicals.
4. Keep connector sockets free of contaminants.
sPeCIFICAtIOns
Battery type: Lithium polymer
Input voltage: 5 V (USB)
Max. input current: 1000 mA
Capacity: 7000 mAh/3.7 V
Output voltage: 5 V (USB)
Max. output current 1: 2000 mA
Max. output current 2: 1000 mA
Size: (L)132 × (W) 50 × (D) 19 mm
Weight: 178 g
USB ACCUPACK 7000
19