Inspection And Maintenance - Hörby Bruk 4154 Instrucciones De Montaje

INSPECTION AND MAINTENANCE

The frequency of inspection and maintenance will vary with the type of equipment or materials used or other factors (e.g.
heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ....).
Special attention should be given to the swing hooks, rings, eights, plastic welds and ropes. Moving metal parts must be
oiled regularly.
Routine visual inspection (weekly to monthly)
• Always check that the bolts and nuts are securely fastened.
•
Check the shock absorbing surface for objects that don´t belong there.
•
Check for missing parts.
• Check the equipment ground clearances.
Operational inspection (1 to 3 months)
• Check the stability of the construction.
•
Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
•
Check for rust and corrosion.
•
Check every part for excessive wear and replace when necessary
Discard all plastic packaging materials (choking hazard).
Please keep the assembly and installation instructions for further reference.
3
1