Ultimate T2 Serie Manual Del Usuario página 5

Features
• Class AB Circuitry
• 2 Ohm Stable Amplifier
• MOSFET Power Supply
• Multi-Channel Capable
• Illuminated "Ultimate" logo
• Overload Protection Indicator
• Gold Plated RCA Connections
• Low Level Input – variable up to 8 volts
• High Level Input – variable up to 10 volts
• Gold Plated Terminal Block for Power Input & Speaker Output
• Crossover Selection Switch for LPF / Full / HPF
• Variable Low Pass Filter Control from 40 to 200Hz
• Variable Crossover Control for 40 to 400Hz
• Variable Bass Boost Control from 0 to 18dB at 45Hz
• Bass boost – switched 12dB at 45 Hz
• Protection Circuitry against Short, Overload and Thermal
1 Not available on T2-1200 and T2-1400
2 T2-1200, T2-1400 and T2-2100only
3 T2-2450 and T2-5450 only
Protection
This amplifier has been outfitted with protection circuitry against short, overload, and
thermal shut-down. In a functional state, the LED glows "red" and indicates "power
on". Should the amplifier sense any fault in your speakers or subwoofers, or reach a
point of thermal shutdown, the LED will glow "blue". In this case, the power must be
shut down to the system to bring the amplifier back to a functional state.
All manuals and user guides at all-guides.com
1
1
3
5
2
2
T2-Series