Worx Professional JAWHORSE WU060 Manual Del Usuario página 10

Symbols
Read the manual
Warning
Wear eye protection
Wear dust mask
Wear ear protection
Do not expose to rain or water
Do not burn
Pinch points
Keep stander-by away
Wear gloves
All manuals and user guides at all-guides.com
1
2
8
Operating instructions
Note: Before using the tool, read the instruction book carefully.
INTENDED USE
The JAWHORSE is a versatile workstation for holding, clamping,
TM
supporting.
SET-UP INSTRUCTIONS
1. Put the JAWHORSE upside down on the ground, loosen the
TM
rear leg locking knob (12) and slide the rear leg from its storage
position. Pivot the leg to position and slide it all the way upward
then lift and slide it fully into its housing at the rear. Tighten the
knob. (See Fig.A-C)
2. Raise the foot pedal (5) until it "clicks" into position.
(See Fig.D-E)
3. Rotate the front legs (7) all the way forward until they "click" into
position. The front leg locking latch (10) will be open automatically.
(See Fig.E)
4. Turn the JAWHORSE upright and recheck that all legs are
TM
locked firmly in position.
FOLDING INSTRUCTIONS
Folding is the reverse procedure of above. (See Fig.F-K)
1. Ensure that the lock / release switch is in the "unlock position".
(See Fig.F)
2. Slide the front leg latch and fold the front legs into position.
(See Fig.G)
3. Draw the foot pedal locking latch and place the foot pedal in
folding position. (See Fig.H)