Safety Instructions - Worx Professional JAWHORSE WU060 Manual Del Usuario

Safety instructions

Warning! When using this product basic safety precautions
should always be followed. Failure to follow all instructions listed
below may result in personal injury.
Read all these instructions before attempting to operate this
product and save these instructions.
1
Keep work area clear and well lit.
Cluttered areas and benches invite injuries.
2
Make sure all moving parts are free from interference.
3
Ensure JAWHORSE is set up on firm, level ground in a stable
TM
manner.
4
Keep other persons away.
Do not let persons, especially children, not involved in the work
touch the tool and keep them away from the work area.
5
Be aware of over-balancing. When a large piece is cut from one
end of a job, the remaining piece may be heavy enough to tip the
JAWHORSE TM . Always ensure the workpiece is well supported.
6
Check to make sure that all fixing screws and knobs are
tight and all legs are locked into place before operating the
JAWHORSE .
TM
7
The tool must be used only for its prescribed purpose. Any use
other than those mentioned in these instructions will be considered
a case of misuse.
The manufacturer shall not be liable for any damage or injury
resulting from such cases of misuse.
8
Never stand on this product.
9
Dress properly.
All manuals and user guides at all-guides.com
10
11
12
13
14
15
16
17
7
Do not wear loose clothing or jewelry, they can be caught in
moving parts.
Non-skid footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.
Use personal protective equipment.
Use safety glasses.
Use face or dust mask if working operations create dust.
Save all warnings and instructions for future reference. Refer
to them frequently and use them to instruct others who may use
JAWHORSE TM . If you loan someone JAWHORSE
these instructions also to prevent misuse of the product and
possible injury.
Do not use tools in damp or wet locations. Moist work piece and
environment can not clamp firmly.
Ensure the work piece was clamped firmly and the lock release
switch is on proper state before use.
Check damaged parts. Before further use of tool, it should be
carefully checked to determine that it will operate properly and
perform its intended function.
When not in use, tools should be stored in a dry locked-up
place, out of the reach of children and do not allow persons
unfamiliar with it.
Have your JAWHORSE TM serviced by a qualified repair person.
Warning
The use of any accessory or attachment other than one
recommended in this instruction manual may present a risk of
personal injury.
TM , loan them