Assembly - HAMPTON BAY MEF2823CBWLG Guía De Uso Y Mantenimiento

assembly

1
Assembling the top front panels
□ Align the holes in the upper front horizontal panel (F) with
the holes on the top of the lower front horizontal panel (G).
□ Insert one large bolt (BB) and washer (CC) into each hole on
the lower front horizontal panel (G) and securely tighten. Do
not strip the bolts by overtightening.
2
Assembling the front panels
□ Insert four wood dowels (AA) into the holes in the blocks on
the bottom edge of the lower front horizontal panel (G).
□ Align the holes in the top of the right front panel (E) with
the wood dowels (AA) on the right side of the lower front
horizontal panel (G) and push down until flush.
□ Insert one large bolt (BB) and washer (CC) into the hole in
the block on the right front panel (E) and securely tighten.
Do not strip the bolts by overtightening.
□ Repeat these steps for the left front panel (D).
3
Assembling the side panels
□ Locate the left side panel (C).
□ Align the holes in the mantel assembly with the holes in the
left side panel (C).
□ Insert one large bolt (BB) and one washer (CC) into each
of the three holes in the three blocks on the left side
panel (C) securing the left side panel (C) to the mantel
assembly. Tighten until secure. Do not strip the bolts by
overtightening.
□ Repeat for the right side panel (B).
All manuals and user guides at all-guides.com
6
F
F
G
CC
F
G
D
E
B
G
CC
BB
AA
D
BB
E
C
CC
BB