LEXMAN WSS50-10/13-L Manual De Instrucciones página 13

EN
IMPORTANT SAFETY INSTRUCTIONS.
WARNING
THE PRODUCT SHALL BE DISCONNECTED FROM ITS POWER SOURCE DURING CLEANING,
MAINTENANCE AND WHEN REPLACING PARTS.
IT IS IMPORTANT FOR THE SAFETY OF PERSONS TO FOLLOW THESE INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
The instructions shall include the substance of the following:
- The product shall be disconnected from its power source during cleaning, maintenance and when replacing parts.
- If you have any doubts regarding installing the motor yourself, and in order to avoid any safety risks, injury or damage, we recommend that
you have the product tted in by a professional.
- Do not allow children to play with xed controls. Keep remote controls away from children.
- Frequently examine the installation for imbalance and signs of wear or damage to cables and springs, if applicable. Do not use if repair or
adjustment is necessary.
- Watch the moving shutter and keep people away until the shutter is completely closed;
- Take care when operating the manual release with the shutter open since it may fall rapidly due to weak or broken springs.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly quali ed persons in order to avoid a hazard.
IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION.
WARNING
- INCORRECT INSTALLATION CAN LEAD TO SEVERE INJURY.
FOLLOW ALL INSTALLATION INSTRUCTIONS.
- The A-weighted emission sound pressure level of the product is equal to or less than 70dB(A).
- The product must be installed at a minimum height of 1.5m and not accessible to the public.
- Fixed controls have to be clearly visible after installation.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.
Nominal torque
Tube axis diameter
Voltage
Motor power
Wire section/length/type
Nominal speed
Motor body diameter
Main body length
Maximun load
IP Level
Humidity range in operating
conditions
IMPORTANT NOTE: the motor is equipped with a thermal protection. In case of repeated use,
the thermal protection mechanism may be activated as a response to normal heating up of
the motor. In such case, the motor will stop and cannot be operated up or down until the
internal temperature of the motor has come down. This waiting time may last from a few
minutes to several tens of minutes.
SPECIFICATIONS
10 Nm
60 mm
230V~50Hz
136 W
7mm-4x0,75mm²/ 2m /Flexible
13 rpm
45 mm
440 mm
20 Kg
IP 44
5 à 95% RH
13