Flux's SATURNO Manual página 2

USAGE
For Photography/Live Streaming/Beauty/Makeup/Nail Salon
and other lighting applications.
INSTALLATION
1. Unscrew the adjusting knob at the bottom of the Tripod.
2. Pull the legs straight down and into position.
3. Adjust the tripod to the appropriate height and tighten
4. Install Ball Joint.
5. Connect the ring light and the Ball Joint together.
6. Install the phone holder.
Ring Light Instructions
• After the installation, connect the USB to the power supply and
press the to light up.
• can adjust the color temperature.(Cold Light, Nature
Light, Warm Light)
• can adjust the brightness of the ring light. There are
10 color levels, you can adjust the light to a comfor-table level
as you need.
• After use, press to turn off the power.