Operating Instructions - Vivanco PB 2600 WH Manual De Instrucciones

GB 33896 / 33897 / 33898
Power Bank 2600mAh
3
1
5
Technical data
Battery: 2600mAh, Li Ion, assembled,
non-exchangeable
Entry: 5V=, micro USB type B connector
max. 1A (pos. 2)
Exit: 5V=, USB type A connector
max. 1A (pos. 4)
Capacity display: 4 LEDs (pos. 5)
Pocket lamp: white LED (pos. 3)
Operating environment: 0°C - 45°C
Storage: -10°C - 45°C
Dimensions: approx. 78mm x 32mm x 24mm
Weight: approx. 67g
Charging times:
USB connection with the computer (500mA):
approx. 7hours
Power supply (1000mA): approx. 3,8hours
Before using your device, please read
the safety and operating instructions
carefully. Only then you will be able to use all
the functions safely and reliably. Keep this
manual safe and pass it on to any subsequent
user.
Proper use
Power Bank serves as mobile charge for
equiments with USB charging option like
smartphones, digital cameras,... with a charge
current of max. 1A.
Use the device only in closed, dry rooms.
The contact humidity could cause a short
circuit risk.
This device is intended for private use only
according to this manual and is not to be used
for professional purpose.
Any other form of use constitutes improper use
and can result in material damage and even
personal injury.
The manufacturer does not accept any liability
for damage caused due improper use.
4
Injury risk
Keep the product away from children.
• The device is not a toy. Incorrect use can
2
Keep the product away from pets.
• Swallowing risk
4
Danger of explosion
• By damaging or opening the case.
• By short circuit: Do never short-circuit the
Risk of fire
Overheating through malfunction:
• DO NOT use device if it seems to be
• Only operate device with 5 V=. Provided
Excessive heat by heat accumulation:
• Do not cover the device.
Short circuit by mechanical damage:
• By fall, crush and stroke.
Short circuit through penetrating moisture:
• Only use in dry indoor rooms"
• Do not clean the device with a humid cloth
• Set the device at the environment
Content
- Power Bank
- SB cable
- Instructions of use
Operation/assembly/disassembly
Before first use, recharge Power Bank
completely on A).
A) Charging Power Bank
Power Bank can be charged with charging
devices with USB connection (not included in
the scope of delivery) for car or plug socket or
on a computer with USB connection.
1. Check if the USB exit of the charging device
2. Connect the included USB cable with Power
3. Connect the included USB cable with the
4. Perform the disassembly in reverse order.
B) Charging a device with Power Bank
The charging process starts automatically.
Safety instructions
cause damage to persons.
The case is closed and must not be opened.
contacts.
damaged.
voltage and maximum current must
correspond to what is indicated on the type
plate of the device.
temperature to avoid the formation of
condensed water.
delivers 5V.
Bank (small connection pos. 2).
charging device. (big plug socket). The
charging process starts automatically.
The LED (pos. 5) are illuminated
permanently during the charging process
and indicate the charging status.