Rubbermaid FASTTRACK 7W97 2001933 Instrucciones De Montaje página 3

STEP 1
INSTALL DOOR PANEL TO SIDE PANEL
Hinge screw locations indicate front edge of side panels (A & B).
Place right door (C) into position, align TOP hinge hole with right side panel (A) screw boss.
HINT: Use the other side panel (B) to hold the door up to the level for ease of alignment.
You will need six hinge screws (H) for assembly of each door panel.
1. Install top screw (1).
2. Align bottom hole and install screw (2).
3. Install remaining screws in sequence (3-6).
4. Repeat for other door panel and side panel.
CAUTION: Do not over-tighten screws.
STEP 2
INSTALL TOP PANEL TO SIDE PANELS
With door panels (C) laying flat, move side panels (A & B) into a vertical position.
Position top panel (E) into side panel grooves and align.
Using four side panel screws (K) install in the order shown.
CAUTION: Do not over-tighten screws.
1
3
A
A
2
1
4
5
6
2
B
E
3
C
4
3