Before The First Use; Using The Appliance - senya SYCP-IM002 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
 Capacity: 12kg in 24 hours
 With removable basket
 Indicator of Add water
 Indicator of Ice full
 Drain opening plug at the bottom of the appliance
 With compressor and R600a refrigerant
 Power: 220-240V 120W
III- USE
III.1 BEFORE THE FIRST USE
1. Clean the Shovel, Basket with hot soapy water to remove all manufacturing residues.
2. WARNING:
 Do not immerse the main body and power cord/plug in water or any other liquid.
 Never overturn the machine, it may damage inside components.
III.2 USING THE APPLIANCE
1. Check if the Stopper in bottom machine is well inserted inside the drain outlet
2. Open the Lid and take out the Basket.
3. Fill water into the Water tank, min 500ml, max 1500ml, according to ice quantity your want to
make.
Note:
 Make sure the water in the Water tank is more than 500ml, otherwise the machine cannot
make ice and the Add Water indicator on control panel will flash.
 If water exceeds the "Max level" 1500ml, you need unplug the Drain stopper and release
the excess water. Do not turn over machine to release excess water!
 Do not fill into hot water to avoid damaging machine!
4. Put back the Basket and close the Lid.
5. Plug in the power socket, the Ice making indicator flashes green, press the On/Off button, the
ice making indicator keeps lighting, now the machine starts to make ice.
6. After about 8 minutes, the first cycle of ice making is completed, and the ice cubes will be
moved to the Basket automatically.
7. When the Basket is full with ice cubes, the Ice full indicator will flash red and machine stops
working. You need open the lid and take out the ice, then close the lid and machine will
resume working automatically.
8. When the water is less than 500ml, the Add water indicator flashes red and machine stops
working.
Note :
 Take out ice as soon as possible as machine has no refrigeration function.
 If you need make more ice cubes, add water, press the ON/OFF button to turn off the Add
water indicator, and press it again to continue working.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido