Sveon STV Mobile Serie Manual De Usuario página 58

Create a folder
Creating a folder conveniently stores all the files that make up a movie on your hard drive so that it is ready for burning.
To create a folder, do this:
To create a folder, do this:
1. Check the Create a folder option.
2. Click on the directory button and select where you want to save the folder.
Note: Creating a folder overwrites existing data in a directory.
3. Click Burn. The task begins immediately. Cyberlink Power Producer displays the real-time progress.
15.5 Right-to-disc
You can burn video content from a DV camcorder, HDV camcorder, TV, webcam or VCR directly onto a DVD or Blu-ray
Disc without the intermediary step of first writing to your hard drive. This can save you a lot of time when you want to store
video on a disc.
Note: There are some options wich are only available in the full versions (Ultra/Deluxe).
Burn video Right-to-disc
To burn video directly to disc, do this:
1. Start Cyberlink Power Producer
2. Click Right-to-Disc.
3. Insert your target disc and ensure the correct drive is selected
4. Select a recording speed in the Maximum Speed drop-down list.
5. Select the target disc format from the drop-down and then click Next.
6. From the Recording from drop-down list, select the source you want to record from.
7. If requird, click
8. If requird, set the configuration items.
9. Click Record to begin burning.
Note: The burning process may take at least a few minutes, depending on the lenght of your video.
15.6 Disc Utilities
CyberLink PowerProducer contains a number of utilities for managing disc content and format, disc image files and disc
folders. To access these useful utilities, select Disc Utilities on the CyberLink PowerProducer home page.
• Erase a disc
• Copy a disc
• Make a disc DVD-player compatibleFinalize/Unfinalize a disc
• Finalizar/No finalizar un disco.
• Burn a disc from a disc image
• Save a disc image
• Burn a disc from a folder
• Export to file
Note: The functions available to you may differ due to the version installed on your computer.
Erase a disc
If you are using a rewritable disc you can erase content that was previously recorded on it. This allows you to reuse the
same discs over and over without the need to continually buy new discs.
To erase a disc, do this:
1. Start CyberLink PowerProducer.
2. Click Disc Utilities.
3. Click Erase Disc.
to configure your device.
STV50 User Manual
Index
1. Welcome
2. Features
3. System Requirements
4. Content
5. Hardware
6. Connections
7. Driver and software installation
8. Uninstallation
9. Cyberlink Power Director
10. Multimedia Video Capture
11. Preferences and options.
Power Director
12. The Workspace. Power Director
13. Production Mode. Power Director
14. Creating Discs. Power Director
15. Cyberlink Power Producer
16. . VivaStation
17. Technical Specifications
Important Information
English 58