Electrical Wiring Diagram - Bayside MEGARA 48 Manual

Bayside Megara Fan Installation Instructions
WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY A
LICENSED ELECTRICIAN.
NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE FIXED
WIRING.
 Connect "LIVE" supply wire to the "L" of terminal block on the mounting bracket.
 Connect "NEUTRAL" supply wire to the "N" of terminal block on the mounting bracket.
Connect "EARTH" wire to the "

Insert the receiver into the mounting bracket and onto the ball joint.

Connect the output connector (1) from the receiver to the connector (1) from the fan body.

 Connect the connector (2) from the fan mounting bracket to the input connector (2) from the receiver.
6 | P a g e

ELECTRICAL WIRING DIAGRAM

" of terminal block on the mouthing bracket.
Fig. 7
v 1 . 0 ( 0 3 / 2 0 2 0 )