Storage; Troubleshooting - Kenmore 408.91200310 Manual De Uso Y Cuidado

CLEANING AND MAINTENANCE
WARNING: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE
HEATER AS THIS COULD CREATE A FIRE OR ELECTRIC SHOCK HAZARD, OR
DAMAGE THE UNIT.
1. Perform the cleaning procedures described in "CLEANING AND
MAINTENANCE"
2. Wipe all parts dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.
If your heater fails to operate, follow these procedures before contacting
customer service:
Problem
The room temperature has
warmed up to thermostat
setting.
Unit is not
heating.
Tip-over switch has been
activated due to the unit
tipping over.
A drop of oil may have
fallen on the heating
element during the
manufacturing process. It
The heater is
will quickly evaporate and
creating a
should not occur again.
burning smell.
Check and ensure there
are no combustible
materials within 3 feet
(0.9 meters) of the heater.
DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING
SO WILL VOID THE WARRANTY AND MAY CAUSE DAMAGE OR PERSONAL
INJURY.
All manuals and user guides at all-guides.com

STORAGE

TROUBLESHOOTING

Probable Cause
8
Solution
Adjust the thermostat control
knob to a higher setting. For
more information on using the
thermostat, refer to page 6.
Put the unit back to normal
upright position and plug
back in.
To eliminate oil smell if it
occurs, ensure room in which
heater is situated is well
ventilated.
Remove any combustible
items from the vicinity of the
heater.