General Use; Intended Use; False Use; Commissioning - HanseLifter SDJ Serie Instrucciones De Uso

General use

The high-lift truck of the SDJ series is designed to transport and lift loads. Loads may be transported over short
distances and loads may be lifted up to the model-specific lifting height for storing in and removing from
shelves. The high-lift truck of the SDJ series is a platform floor truck that can be used in a versatile and reliable
manner.
Please always observe the load graph attached to the platform floor truck.

Intended use

Please use the platform floor truck only to transport goods respectively loads. The platform floor truck must only
be used in dry rooms with flat floors. Keep the platform floor truck away from moisture and wet conditions. If the
device made contact with rain for example, dry the platform floor truck immediately and grease all moving parts
at the designated grease nipples. Furthermore any contact with dust, sand, or other abrasive and aggressive
materials should be avoided. Please ensure that no belts or ropes get caught in the wheels.
Keep the platform floor truck away from aggressive and dirty environments.
When working, please observe that the floor has sufficient load-carrying ability.

False use

•
It is prohibited to transport persons or animals on the platform floor truck.
•
It is also prohibited to take a ride on the platform floor truck.
•
Do not reach into moving parts and please observe that no other persons reach into moving parts.
•
Please observe that there is nothing under the forks. There is the risk of crushing.

Commissioning

1. In order to lift the lifting forks, please push the lever (2) downwards and pump by moving the drawbar
up and down.
2. In the centre (neutral) position of the lever (2) you can move the platform floor truck by means of the
drawbar without lifting the lifting forks.
3. If you want to lower the lifting forks, please pull the lever (2) in an upwards direction.
SDJ – Series

Figure 1 Operation of tiller-bar

Duplication, even in parts, is not permissible.
Page 9 of 13