Product Description; Use Instruction; Cleaning Method - PEM KT-161 Manual De Usuario

3. Its service life may be reduced or cause a potential risk when the device is used in an
unsuitable environment such as: high temperature, excessive dust, corrosive gas and
external environment. Please take care!
4. The kettle may only be used on the suitable base and should not be used on the base of
another product. Other devices cannot use this base.
5. Position the kettle properly on the power base before switching on.
6. When filling water, the maximum water level cannot be exceeded to prevent steam or hot
water to escape or overflow from the nozzle or the spout of the kettle.
7. This kettle is not provided with anti-dry burning power. The kettle must always contain
water before being used in order to avoid burning the kettle and in order to extend its life.
8. When the boiler is operating, the metal part of the kettle's body is very hot and must be
taken into account to avoid burns.

PRODUCT DESCRIPTION

This electric kettle with its simple modern design will bring you pleasure in your life.
Rapid heating of the water and energy saving
●
Fine filter screen is used for filtering impurities in the water
●
Steam induction controller, automatic shutdown after the water is boiling
●
Reached high quality temperature
●
360 rotating base
●
Noble and graceful stainless steel shell
●

USE INSTRUCTION

1. After opening the lid of the kettle, remove the kettle from the base and fill with water. Be
careful not to exceed the maximum water level. Install the kettle properly on its base to
ensure good contact.
2. Connect the power line to the outlet and press the switch on button, the power indicator
will switch on and the water begins to heat.
3. Once the water has boiled, light turns off automatically. Then remove the kettle from the
base and help yourself.
4. The water must be filled as needed.
5. If the kettle is not used for a long time, drain the remaining water and let it dry with the lid
open.
This photo is only for reference as an example.
After the water has boiled, be careful when you open the lid of the kettle to prevent burns.
CLEANING OF THE KETTLE
The body and the base of the kettle cannot be cleaned by soaking them in water.
To extend the service life of the kettle, cleaning of mineral residues is recommended regularly.
Before cleaning, it is necessary to unplug and let the kettle cool down. Do not clean the inside of
the kettle and the outer surface with steel wool or with detergents.

CLEANING METHOD

1. Fill the kettle with 0.5L of white vinegar and soak it for 1 hour.
2. Empty the kettle and then clean the residue with a damp cloth.
10