Maintenance; Transportation And Storage - Greencut GE250C Manual De Instrucciones

44

MAINTENANCE

Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the machine is completely turned off before performing any
maintenance or repairs. This will eliminate any potential risk.
The machine is set at the factory. Do not make unnecessary adjustments, adjust only when
necessary due to normal wear.
• After each job, clean the machine thoroughly to remove all dust and debris and repair or replace defective
parts. Always keep the appliance clean, particularly the ventilation grilles. Never spray water on the body of the
appliance.
• Never clean the machine and its components with solvents, flammable or toxic liquids. Use only a damp cloth.
• Keep all nuts, bolts and screws tight to ensure that the equipment is in safe working condition.

TRANSPORTATION AND STORAGE

• Disconnect the machine from the power supply and allow the equipment to cool down completely before
transporting or storing it.
• Always store the product in a clean, safe, dry place with temperatures between 0º and 45ºC.
• The equipment is not weatherproof and should not be stored in direct sunlight, at high temperatures or in damp
places.
• Always store the machine with the cutting element guard fitted.
• Store the machine out of the reach of children.