Kohler 21371-NA Instrucciones De Instalación página 5

2. Connect the Tubing
Water
Supply
Adapter
CAUTION: Risk of property damage. Do not damage, kink, or crimp the
tubing. Avoid cutting the tubing. If it is necessary to cut the tubing, use a sharp
utility knife to make a clean and square cut to avoid water leakage.
IMPORTANT! The water lines must be connected to the proper ports. System
performance and filter capacity will be compromised if connected incorrectly.
IMPORTANT! The filter system must be positioned so that the leak detector on the
base of the system contacts the cabinet floor.
Wet the ends of one of the tubes with water. Press one end firmly into the inlet
port of the filter system, and the other end into the water supply adapter.
Wet the ends of the other tube with water. Press one end into the outlet port of the
filter system, and the other end into the filtered water faucet adapter.
Connect the filtered water faucet inlet to the filtered water adapter.
If desired, secure the tubing to a cabinet wall using appropriate fasteners (not
provided).
Kohler Co.
Filter Unit
5
Filtered
Water
Adapter
1410821-2-A