Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-2122, H-2123
π
H-2124
FIRE EXTINGUISHER
CABINET
TOOLS NEEDED
Drill
Philips Head Screwdriver
WALLS WITH 2 X 4" STUDS
Mount cabinet securely to stud using four #10 x 1¼" long
wood screws, installed through mounting holes in cabinet.
SHEETROCK
Mount a 3/4" board to the wall using 3/16" toggle bolts
(height and width of the board is dependent on cabinet
size.) The board should extend a minimum of two inches
beyond all sides of the cabinet. Mount cabinet to board
using four #10 x 1" long wood screws through the holes in
the cabinet.
CINDERBLOCK OR CEMENT
Mount cabinet using four 1/4" toggle bolt or #10 masonry
lead screw expansion anchors through the holes in the
cabinet.
CONCRETE OR TILE WALL
Mount cabinet using four #10 masonry lead screw
expansion anchors through the holes in the cabinet.
STEEL POSTS OR BEAMS
Special tools and fasteners are required. Please use
professional service company to mount cabinet.
PAGE 1 OF 3
1-800-295-5510
uline.com
MOUNTING
3/16" Mounting Holes
Para Español, vea página 2.
Pour le français, consulter la page 3.
(Back of Cabinet)
0421 IH-2122
Publicidad
Manuales relacionados para Uline H-2122
Resumen de contenidos para Uline H-2122
- Página 1 Para Español, vea página 2. Pour le français, consulter la page 3. H-2122, H-2123 π 1-800-295-5510 H-2124 uline.com FIRE EXTINGUISHER CABINET TOOLS NEEDED Drill Philips Head Screwdriver MOUNTING WALLS WITH 2 X 4" STUDS Mount cabinet securely to stud using four #10 x 1¼" long wood screws, installed through mounting holes in cabinet.
- Página 2 H-2122, H-2123 π 800-295-5510 H-2124 uline.mx GABINETE PARA EXTINTORES HERRAMIENTAS NECESARIAS Taladro Desarmador de Cruz MONTAJE PAREDES CON COLUMNAS DE 2 X 4" Coloque el gabinete de forma segura en la columna usando cuatro tornillos para madera largos #10 x 1¼"...
- Página 3 H-2122, H-2123 π 1-800-295-5510 H-2124 uline.ca ARMOIRE À EXTINCTEUR OUTILS REQUIS Perceuse Tournevis cruciforme INSTALLATION MURS AVEC MONTANTS DE 2 X 4 PO Fixez l'armoire solidement aux montants à l'aide de quatre vis à bois longues n° 10 x 1 ¼ po insérées à travers les trous de fixation de l'armoire.