Life Smart LS1002THD13 Manual Del Usuario página 13

PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Heater to be
operated only in upright position with caster wheels attached.
Turn on the main power switch in the rear of the unit. Press the On/Off button on the display to power up
the heater's display.
You may also use the ON/OFF button on the remote as well, but you will need to insert 2 AAA batteries
into the remote control battery compartment before using (Batteries Sold Separately)
Rear of
Remote
Push and Slide Cover Battery
13
Reinstall Cover