Uniteck UNIFIX 50 Manual De Instrucciones página 13

UNIFIX 50
RECOMMENDATIONS
Mount Unifix brackets only on surfaces with sufficient bearing capacity. Consider the additional load
with the panel:
Support
Unifix 50 = 2,6 kg
Fastening: to prevent large quantities of snow from accumulating behind the sensor, install
appropriate barrier grids.
The position of the solar panel influences your electrical production. Choose the most optimal inclination
and orientation to suit your environment. Avoid shaded areas or objects that are a source of shadow
(eg tree)
Before attaching and connecting, please observe:
• the maximum distances between each element shown below.
•
connecting order
Unifix wiring with Uniconnect 1.6 connection kit
Panel 3
1 m
max
(1)
(1) Possibility to extend the distance between the panels by one additional meter, by adding a
Unicable 612B and 612 R (cables not supplied with the Uniconnect 1.6 kit).
(2) Battery connection kit, not included with Uniconnect 1.6 (optional).
Connecting Order
In case of disconnection please proceed in reverse order. For more information, refer to the operating
manual of your photovoltaic charge regulator.
Unisun 50.12M / 55.12 BC
Panel 2
panel 1
1 m
max
(1)

connecting regulator ➔ battery
 connecting solar panel ➔ regulator

connecting regulator ➔ electrical devices
www.uniteck.fr
Panel
=4,1 kg / 3,8 kg
Cable-
Regulator
8 m max
1
EN
Batteries
2 m max
1
4 m
max
(2)
2
13