PNI HOUSE WIFI660 Manual De Usuario página 4

Working temperature
WiFi frequency
Transmission power
Instructions for use
Installing the storage unit
Before first use, please install the storage unit. Only one SATA HDD with a
maximum capacity of 6TB can be installed in the recording unit housing (the
HDD is not included in the package).
• Loosen the screws and remove the NVR cover
• Connect the data cables and secure the hard drive to the screws
• Put the NVR cover back on its position
• Connect the power and internet cable to the NVR
Turning the NVR on
Plug the power cord into a 230V outlet. The NVR will start. The indicator LED
will light up.
If the start time is within the preset program for recording, then the recording
function will start automatically
Notes:
1. Check that the input voltage corresponds to the recommended voltage of the
device. The supply voltage is 230V ± 10% / 50 Hz 2A.
2. We suggest using a UPS device to protect the device from voltage fluctuations.
Turning the NVR off
There are two ways to turn off the device.
1. Access the main menu (right click on the screen) and select the option
Logout - Shutdown
2. Turn off the power supply.
User manual
-26°C ~ +80°C
2.4GHz
100mW
4