HAEGER Magic Micro 26 Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
process will stop. After turning the food, press the Instant/Start button and the
preset defrosting procedure will continue.
5) To stop the process before the end of the setting time, press "Stop/Clear"
button twice.
6) Once the process is completed, the screen displays the time and a beep will
sound three times, indicating that the time is completed.
CAUTION
a. It is necessary to turn over the food during operation to obtain uniform effect.
b. Usually defrosting will need longer time than that of cooking the food.
c. If the food can be cut by knife, the defrosting process can be considered
completed.
d. Microwave penetrates around 4cm into most food.
e. Defrosted food should be consumed as soon as possible, it is not advised to put
back to fridge and freeze again.
6. AUTO MENU
The microwave oven has default cooking menu. Select the appropriate menu
depending on the type of food and weight according to the following table, otherwise
the cooking effect will be greatly affected.
1) In the waiting state, turn the Auto Cooking/Time.Weight knob to choose the
menu (A.1, A.2, ..., A.8). The below table shows the 8 options for cooking food.
2) Press the "Instant/Start" button to start the cooking process. The LCD screen
displays the countdown of the selected cooking time.
3) To stop the process before the end of the setting time, press "Stop/Clear" button
twice.
4) Once the process is completed, the screen displays the time and a beep will sound
three times, indicating that the time is completed.
CAUTION
a. The food temperature before cooking should be 20-25℃. Higher or lower
temperature of the food would require increase or decrease of cooking time.
b. The temperature, weight and shape of food will largely influence the cooking
effect. If any deviation has been found to the factor noted on above menu, you
can adjust the cooking time for best result.
10

Publicidad

Tabla de contenido
loading

Tabla de contenido