General Maintenance - POLTI Vaporetto SV660_STYLE Manual De Instrucciones

When dispensing the deodoriser, the sur-
faces may feel slightly damper because
Polti Frescovapor mixes with the steam
being dispensed. To stop dispensing Polti
Frescovapor, move the selector located on
the brush to the OFF position.
The selector only controls dispensing of
the deodoriser that mixes with the steam.
It does not regulate the quantity of steam.
To adjust the amount of steam, use the cen-
tral steam regulation button - STEAM REG-
ULATION (7).
Contains one 200-ml bottle of Polti Fresco-
vapor .
For more information on Polti Frescovapor
visit www.polti.com.
WARNING: Before using Polti Frescovapor
on upholstery, leather, special fabrics and
wood surfaces, consult the manufacturer's
instructions and always carry out a test on
a hidden part or sample of the material. Al-
low the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
15. EXTRA STEAM FUNCTION
Use only the Portable Steam Cleaner.
The Extra steam function can be activated for
quicker and easier cleaning. To activate, press
the steam button for 3 seconds. You will pro-
duce more steam for 5 seconds. This function
can be reactivated approximately one minute
after the previous activation.
16. AUTOMATIC SHUT-DOWN
FUNCTION
After 10 minutes of inactivity (calculated from
the last operation carried out on the appli-
ance in both modes: Steam Mop and Porta-
ble Steam Cleaner) the appliance will shut
off automatically and the OFF light will flash.
To reactivate the appliance, press the Steam
Regulation button.
17. OUT OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank has been used
up, steam will stop coming out. Just refill the
water tank, as described in Chapter 1, to begin
steaming again.
WARNING: This operation must always be
done after having disconnected the appli-
ance from the mains.
18. REPLACEMENT OF THE
LIMESCALE FILTER
Polti Vaporetto STYLE has a filter containing
special resins capable of stopping limescale
and extending the life of your product.
We recommend changing the filter 3 times
per year.
18.1 Unplug from the mains electricity.
18.2 Remove the water tank from the appli-
ance by pressing the upper button and pulling
it upwards (1-2).
18.3 Gently lift the hook tab and remove the
old filter (19).
18.4 Position the new filter, push gently and
make sure that it is perfectly inserted, then re-
place the water tank.
For more information on limescale filters visit
www.polti.com.
The first time it is used or when replacing
the limescale filter, it will be necessary to
activate steam delivery and wait until the li-
mescale filter fills with water and the prod-
uct produces steam again.

19. GENERAL MAINTENANCE

Ensure that the appliance is switched off and
disconnected from the mains.
To clean the outside of the appliance, use a
damp cloth and tap water only.
All accessories can be cleaned using running
water, ensuring they are completely dry be-
fore the next use. After using the brushes, let
the bristles cool down in their natural position
in order to prevent any deformation.
Do not use detergents of any kind.
The cloths provided can be washed by follow-
ing the instructions included on the label.
29