Intended Use; Before Using The Appliance For The First Time - Ritter ESM 50 Instrucciones De Montaje Y De Uso

English
Overview of LED display (6)
LEDs
Hand off
blender in
LEDs flash in sequence from left to
charging
right
station
All LEDs flash simultaneously
Hand 1, 2, 3 or 4 LEDs light up
blender not
in charging
LED 1 flashes slowly (1 s on/1 s off)
station
LED 1 flashes rapidly (0.1 s on/1 s off)
All 4 LEDs flash slowly (1 s on/1 s off)
Unfold the illustrations at the front
and back of this manual.
Please read these instructions
thoroughly before you start to use
the appliance. Keep these oper-
ating instructions in a safe place
and ensure that they are included
with the appliance if passing it on
to a third party.
Alternatively, the current operat-
ing instructions are available at
www.ritterwerk.de.

INTENDED USE

The hand blender is used to
purée, chop, whisk and mix suita-
ble household foods.
The hand blender is
suitable for contact with
foodstuffs.
The hand blender is to be used
for domestic purposes only and
must not be used commercially.
If the hand blender is used in a
manner other than its intended
use or if it is incorrectly operated,
serious injuries may occur or the
blender may be damaged. All
warranty and liability claims will
be rendered null and void in this
case.
14
Description
Battery fully charged
Battery is charging; the last LED to flash indicates
the current battery level
Operator error (appliance is switched on in
charging station)
Appliance is in use; number of LEDs indicates the
current battery level
Battery is dead
Battery is defective (see „CHANGING THE
BATTERY")
Overload protection (see „FUNCTIONS")
FUNCTIONS
With your battery-operated hand
blender, you can purée, chop,
whisk and mix both solid and
liquid foods.
The hand blender (1) is supplied
with a plastic blending cup (14)
and the following attachments:
– Universal cutter (9): Standard
attachment for chopping and
puréeing most foods
– Cutting knife (10): For chop-
ping meat and fibrous fruit and
vegetables
– Whipping disk (11): For lightly
beating and whipping foods
(e.g. cream)
– Stirring disk (12): For mixing
and blending thick, creamy
foods
The hand blender has 3 speed
settings.
An overload protection function
with a safety switch-off mecha-
nism is automatically triggered in
the event of:
– Overheating
– A blade becoming jammed
– Continuous operation for more
than 4 minutes
BEFORE USING THE
APPLIANCE FOR THE
FIRST TIME
• Before you use the appli-
ance for the first time, have a
specialist install it in a suitable
drawer (see „ASSEMBLY AND
INSTALLATION").
• Clean the hand blender (1) and
accessories before allowing them
to come into contact with any
food (see „CLEANING").
A
Place the contact surfaces of
the hand blender onto the contact
pin of the charging station (13).
L
When in the correct posi-
tion, the hand blender will feel
securely locked into place and
the LEDs on the LED display (6)
will flash.
• Leave the hand blender in the
charging station until the battery
is fully charged (see „CHARGING
THE BATTERY"). The battery is
partially charged upon delivery.