KSIX LCAUTWMINI Manual Del Usuario página 4

Note: Every time you turn on the earphones, they will connect
automatically with the last device they were paired with. If you want to
pair the earphones with another device, first you will have to
disconnect them from the device they are currently paired with.
Charge the earphones
The battery indicator on your mobile device screen will show how much
battery is left on the earphones. When the battery is low, you will hear a
sound and the LED indicators will start blinking red. When this happens,
charge the earphones using the charging case.
1. Put the ear buds inside the charging case. Please note that if the
earphones are on, they will turn o automatically.
2. Connect the case to a power source using the Micro USB-USB cable.
You can connect it to a computer or a laptop USB port. If you connect it
to a power outlet you will need an adapter not supplied with this
product.
3. When charging the earphones, the LED indicators will be red.
4. When the battery is fully charged, the LED indicators will be blue.
If you want to charge only one earphone, you can use the individual USB
charging cable included to connect it to a power outlet with a USB
output. For example, a computer.
You can also charge the case inner battery, which can be used to charge
the earphones on the go when there is no power source connection
available.
How to charge the earphones using the charging case
Previously you have to charge the case inner battery. To charge the case
connect it to a power source using the USB-Micro USB cable. During the
charge the case LED indicator will blink red, and will turn blue when the
battery is fully charged.
1. Put the earphones in the case.
2. To start/stop charging the earphones press the case On/O button.
3. When charging the earphones, the earphones LED indicators will be
red.
4. When the earphones battery is fully charged, the earphones LED
indicators will be blue.