Archos ARNOVA 7G2 Manual Del Usuario página 4

CONNECTING TO THE WIFI NETWORK
www
For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARNOVA is
in range of a network that you have already configured once, it will attempt to make a connection.
To configure a new WiFi network, go on the Home screen, tap on the Menu icon
1
select Settings .
Settings Wireless & networks
2 In the screen, select
Wi-Fi
If the WiFi is off, tap on the
3
will scan for available WiFi networks and display them at the bottom of the screen.
Tap on the network you want to connect to, enter the required network information* and then tap on
4
ARNOVA will now attempt to establish a connection to that WiFi hot spot with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters)
of the type WEP, WPA, or WPA2. To obtain the exact connection parameters required, contact the Internet service provider.
4
UserGuide_Arnova_7G2_109860_book.indd 4
All manuals and user guides at all-guides.com
.
Wi-Fi settings
line to turn it on. Then select . The ARNOVA
, then
Connect . Your
01/06/2011 16:47:44