Klarfit Corgi Manual Del Usuario página 16

EN
16
ASSEMBLY OF THE JOGGER KIT
With the jogger kit, you can quickly convert your dog trailer into a pet jogger.
To do this, proceed as follows:
1 Make sure the tow bar is engaged under the frame.
2 Attach the front wheel assembly: Slide the short square tube on the front
wheel over the matching tube on the lower front edge of the trailer cab.
Align the holes in each tube, insert and tighten the „quick release" pin.
3 Attach the Handlebar: Attach the two handlebar mounting tubes to the
frame on the back wall. With the open end of the mounting tube facing up,
align the holes on the tube with the holes on the frame. Insert the bolts
through the tube and holes in the frame and install the 10mm nuts from
inside the cab. Tighten the bolts securely with a screwdriver and wrench.
Slide the ends of the handlebars into the mounting tubes, align the holes,
and insert and lock the locking pins.