Raid Setup Procedure - Clevo P150HM 15CL37 Guia Del Usuario Concisa

RAID Setup Procedure

Part I: BIOS
1. Start-up your computer and press F2 to
enter the BIOS.
2. Go to the Advanced menu, select
SATA Mode and press Enter.
3. Select RAID.
4. Press Esc and go to the Boot menu.
5. Set the CD/DVD-ROM Drive (make
sure the Microsoft Windows OS disc
is inserted) as the first device in the
boot order from the Boot menu.
6. Select Save Changes and Reset from
the Exit menu (or press F4) and press
Enter to exit the BIOS and reboot the
computer.
Part II: Intel Matrix
1. Press Ctrl + i to enter RAID configura-
tion menu.
Figure 2 - Intel(R) Matrix Storage
Manager Option ROM
2. Select 1.Create RAID Volume and
press Enter.
3. Type the RAID volume name and then
press Tab or Enter to advance to the
next field.
4. Specify (use the up and down arrow
keys) the RAID level (RAID 0, RAID 1
or Recovery - see Table 2 on page
and then press Tab or Enter to
advance to the next field.
5. Press Enter and the system will select
the physical disks to use.
6. Press Enter and select (if applicable)
the Strip Size (best set to default).
Concise User's Guide
7. Press Enter and select the Capacity
size (best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and
confirm the selection by pressing Y.
10. This will now return to the main menu.
Figure 3 - RAID Created
11. Select 6.Exit and press Enter, then
press Y to exit the RAID configuration
menu.
12. Press a key when you see the message
"Press any key to boot from CD".
13. Press Enter to continue installing the
6)
operating system as normal (see your
Windows documentation if you need
help on installing the Windows OS).
RAID Setup (Model C Only) - 7