Raid Setup Procedure - Clevo X7200 Manual Del Usuario

Concise User's Guide

RAID Setup Procedure

Part I: BIOS
1. Start-up your computer and press F2 to
enter the BIOS.
2. Go to the Advanced menu, select SATA
Mode Selection and press Enter.
3. Select RAID.
4. Press Esc and go to the Boot menu.
5. Set the CD/DVD-ROM Drive (make sure
the Microsoft Windows OS disc is
inserted) as the first device in the boot
order from the Boot menu.
6. Select Exit Saving Changes from the
Exit menu (or press F10) and press
Enter to exit the BIOS and reboot the
computer.
6 - RAID Setup
Part II: Intel Matrix
1. Press Ctrl + i to enter RAID configura-
tion menu.
Figure 2 - Intel(R) Matrix Storage
Manager Option ROM
2. Select 1.Create RAID Volume and
press Enter.
3. Type the RAID volume name and then
press Tab or Enter to advance to the
next field.
4. Specify (use the up and down arrow
keys) the RAID level (RAID 0 or RAID 1
or RAID 5 or Recovery - see
on page 5) and then press Tab or Enter
to advance to the next field.
5. Press Enter and the system will select
the physical disks to use.
6. Press Enter and select (if applicable) the
Strip Size (best set to default).
7. Press Enter and select the Capacity size
(best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and
confirm the selection by pressing Y.
10. This will now return to the main menu.
11. Select 5.Exit and press Enter, then
press Y to exit the RAID configuration
menu.
12. Make sure the Windows 7 OS DVD is in
the DVD drive. and as the computer
starts up it will automatically boot from
the Windows 7 OS DVD.
13. Click Next to continue installing the
operating system as normal (see your
Windows documentation if you need
help on installing the Windows OS).
14. Install the Windows drivers as per
Table 5 on page
Table 1
17.