Grundig TB 8030 Manual Del Usuario página 26

OPERATION­________________________
1
Press On/Off and mode switch
to switch on the appliance.
– HIGH mode LED
blue and the appliance starts in
HIGH mode.
2
Press On/Off and mode switch
consecutively to select a mode.
– LOW mode LED
blue after pressing
HIGH mode.
– MASSAGE mode LED
up blue after pressing
in HIGH mode.
3
Press On/Off and mode switch
to switch off the appliance,
B
regardless of the mode selected.
– The appliance switches off
after MASSAGE mode LED
disappears.
The 2 minute timer
Regardless of the mode selected, af­
ter 2 minutes the appliance switches
off automatically. Every 30 seconds
the appliance gives a vibration
signal for your timing.
­ 2 6 ENGLISH
B
lights up
D
B
lights up
E
once in
B
lights
F
twice
B
F
Changing the
attachments
1
Remove the current attachment
from the holder by turning it in the
reverse direction of the arrows on
the attachment and the holder.
2
Take the other attachment out of
the storage container for brushing
and cleaning attachments
3 Place the attachment on the
holder. Make sure that the notches
of the holder match the attach­
ment. Turn the attachment in the
same direction of the arrows until
it fits well into place.
Note
Replace the brush head when
■
the bristles become bent and
distorted and the wear indicator
becomes brighter at the side.
We recommend you to do this
every 4 months.
.
H