FILTER CLEANING
• The filter needs to be cleaned periodically, i.e. around two
times a year or, in any case, whenever a reduction in the
vacuum cleaning power is identified.
• DO NOT clean the filter in a washing machine: DO NOT dry
it in an electrical appliance OR with a hair dryer.
• Using a wet filter will result in a reduction of the vacuum
cleaning power and in motor damage.
• After the filter has been cleaned and dried, it must be put
back in the correct position before starting the vacuum
cleaner.
Steps for correct filter maintenance
EN
• Fig. 1 – Press the button to stop the air outflow and open
the grid at the back of the appliance.
• Fig. 2 – Take the filter out.
• Fig. 3 – Pull the button placed on the top part and open
the cover in which the HEPA filter is fitted.
• Fig. 4 – Turn the cover upwards and remove it from the
dust container.
• Fig. 5 – Take out the HEPA filter and wash it.
• Wash the filter cover, the compartment, the air outflow
sponge and the dust container with water (no need to use a
detergent). Then dry these elements in the air before fitting
37