Store The Cleaner When Not In Use - Aqua Products SSDP37 Serie Manual Del Usuario

10
Figure 14. Release the Elastic Band around Bag
4. Pull tabs to unfasten and turn the
bag inside out for thorough cleaning
(Figure 15).
Figure 15. Turn Bag Inside Out
5. Using a hose with clean water, rinse
the filter bag to remove all debris
(Figure 16).
Figure 16. Rinse
6. Replace back into the cleaner body
and replace the cover.
7. Store the cleaner out of direct sunlight
for next use.

Store the Cleaner When Not in Use

Do not leave the cleaner in the pool when
not in use. The cleaner should be cleaned
regularly using slightly soapy clean water. Do
not use solvents such as trichlorethylene or
its equivalent. Rinse the cleaner generously
using clean water. Do not let your cleaner dry
in direct sunlight near the pool.
1. Disconnect cleaner from the power
source.
2. Start at the cleaner head, remove all
coils and tangles from the floating
cable. Lay the cable in the sun to
loosen any tangling memory
(Figure 17).
3. Disconnect the cable from the control
unit.
Figure 17. Untangle the Floating Cable
4. Loosely coil the floating cable starting
at the cleaner and moving toward the
connection point at control unit.
5. Store the cleaner and power supply in
a dry/shaded area.
6. For extended periods, such as Winter
months, store the cleaner in a box
to keep motors, plastics and seals
protected (make sure the cleaner is dry
before storing) (Figure 18).
Figure 18. Long Term Storage for Extended Period