Start / Stop Cleaning; Optimal Patterning/Cable Tangling - Aqua Products SSDP37 Serie Manual Del Usuario

8
Figure 5. Spread Floating Cable to Prevent Tangling

Start / Stop Cleaning

1. Press On/Off button to begin or
interrupt cleaner operation (Figure 6).
Figure 6. Begin Cleaning
2. Press Select button to choose between
Small Pool and Large Pool. Cleaning
duration for Small Pool is 1 hour; for
Large Pool, duration is 2 hours
(Figure 7).
3. Cleaner will begin to move.
ON / OFF
= 1 Hour Shut-off
= 2 Hour Shut-off
Figure 7. Select Pool Size and Duration

Optimal Patterning/Cable Tangling

It is recommended to alternate the angle and
direction of the cleaning path every cleaning
cycle to ensure the cleaner is covering
the whole pool, as well as prevent cable
tangling.
1. Turn the cleaner upside down. Locate the
wheel pins on the axle: one adjustable
pin; one fixed pin (Figure 8).
2. Reverse the positions of adjustable and
fixed wheel pins (Figure 9).
Figure 8. Change Wheel Turning Direction