Descargar Imprimir esta página

Hot Laminating Procedures - Royal Sovereign APL-330U Manual Del Propietário

Ocultar thumbs Ver también para APL-330U:

Publicidad

Idiomas disponibles

Idiomas disponibles

8. This machine is intended for indoor use only.
9. Do not operate machine if plug or cord is damaged.
10. To reduce the risk of electric shock, this product has a polarized
HOT LAMINATING PROCEDURE
1. Do not laminate pouch film without a document or photo inserted into the pouch.
2. When using a small pouch, place the film into the middle area (Sensor area)
of the machine. (There is only one sensor in the middle area of the machine.)
3. Place the item to be laminated into the pouch film.
4. Place the pouch film into the front opening of the laminator with the sealed end
first.
NOTE: If the front sensor is touched for more than 3 seconds, it can
automatically start the anti-jam system. If this occurs the rollers will reverse,
and you will not be able to laminate.
5. Anti-jam system will continue for approximately 15 seconds. You can try
laminating again after 15 seconds.
NOTE: Your finished laminated item will be hot,and will easily bend.
To keep your laminated item flat , place on flat surface and allow to cool.
All manuals and user guides at all-guides.com
If the room temperature is low (under 64
may take longer to turn on.
Contact a qualified electrician.
plug(one blade is wider than the other). This plug is intended to fit in a
polarized outlet only one way. When the plug does not fit fully in the
outlet, reverse the plug. When it still does not fit, contact a qualified
electrician to install the proper outlet. Do not change the plug in any way.
5
APL-330U
o
F), the ready light

Publicidad

Capítulos

Solución de problemas

loading