Cold Laminating Procedures; How To Clean Laminator - Royal Sovereign APL-330U Manual Del Propietário

COLD LAMINATING PROCEDURE
1. Place the laminator on a flat, sturdy work surface.
2. Plug the laminator into a power source that matches the laminator's rate
of voltage.
3. Turn the temperature control switch to the COLD position.
4. Flip the power switch to the RUN position. (Power light will turn on)
5. Adjust the temperature control switch according to pouch thickness.
6. Wait for the READY light to turn on .
7. After the READY light is lit, place item to be laminated into a pouch and then
into the front opening of the laminator.
Power & Reverse Button

HOW TO CLEAN LAMINATOR

1. Turn the machine on. After the READY light is lit, insert non-coated copy
paper that fits the side of the front opening.
2. Pass the paper through the machine once or twice in order to remove glue
and residue from the rollers.
3. If the paper becomes excessively dirty, dispose of it and insert a new sheet.
4. Continue this process until paper comes out clean.
All manuals and user guides at all-guides.com
Temperature control Button
6
APL-330U