Product Specifications; Operation; Accessories - MAGNAFLUX L-10 Manual De Instrucciones

PRODUCT SPECIFICATIONS

Waveform
Coil Size
Field Strength
Duty Cycle
Power Cord
Control Cord
Weight
Electrical
Environmental
Regulatory

OPERATION

1. Position the coil on a bench or clamp vertically in vise.
2. Magnetic Particle Inspection
a.
Place part inside coil. Magnetic field direction is along the axis of coil (longitudinal).
b.
Press foot switch to energize. Apply magnetic particles to part. While energized,
blow off excess powder to reveal indications.
c.
Evaluate indications for size, shape, and relevant locations.
3. Demagnetization
a.
Place part inside coil.
b.
Press foot switch to energize. Withdraw part from coil, up to 18 in / 45 cm distance,
while coil is energized.

ACCESSORIES

Part Number
169799 (NA)
008M003 (EMEAR)
008M004
2480
3
L-10 Coil Operating Manual
AC
10.25 in / 26 cm ID
15 in / 38 cm OD
2.5 in / 6.3 cm wide
2,856 Ampere-Turns
25%, maximum on time 15 sec
12 ft / 4 m
5 ft / 1.5 m
115 V / 13.1 lb / 6.0 kg
230 V / 11 lb / 5.0 kg
115 V / 60 Hz / 12 A
230 V / 50 Hz / 6 A
32-120°F (0-49°C), up to 100% RH, up to 16,300 ft /
5,000 m altitude, non-condensing
Designed for mains +/- 10%, over voltage category
II, wet locations, pollution degree 2 environment
Description
Pie Field Gage
Magnetic Flux Indicators, set of 5
Field Indicator Gauge, 10 Gauss