Airthereal LF200M Manual Del Usuario página 7

3. Place the top cover back onto the diffuser.
4. Insert the Type-C power cord.
5. Press the power button and you will hear a beep sound.
The default settings are as follows:
Atomization level: high
Timer: 3 hours
Brightness: high
Lighting effect: full bright
Notes:
* There will be a beep each time you press a button.
* When there is no water in the tank you will hear 3 beeps
over 2 seconds and the diffuser will automatically power
down.
* When the timer is up you will hear a long beep sound
before the diffuser automatically shuts down.
* If the neutralizer fails for any reason, the LED will flash
quickly for 2 seconds accompanied by a long beep
sound before the diffuser automatically shuts down.
6