Residual Risks; Before The First Use; Contents Of Packing; Intended Use - Batavia MAXXPACK 18 V BT-WBT002 Manual De Usuario

• During operation small
stones or other objects
may be thrown away violently. Wear solid
shoes and long trousers when operating
the device. Wear safety goggles.
• Hold the device firmly with both hands
during operation.
• Only use the device in daylight or good
artificial light. Never use it when the
visibility is bad.
• Do not use the device close to garden
ponds, swimming pools or other bodies
of water. Do not expose the device to rain
or excessively humidity.
• Please take care that the brush roller
does not jam during operation. A long-
term jam can damage the device. If the
rotating brush roller is blocked by an
obstacle, immediately release the ON/
OFF trigger, disconnect the power cord
and free the brush roller.
• Remove the battery pack from the tool
before carrying out any adjustment,
servicing or maintenance.
• Before using the device, check for dam-
ages and do not use a damaged device.
Should the device become damaged do
not use it and have it repaired by a pro-
fessional or contact our customer sup-
port department. Do not disassemble
the device or try repairing it yourself.

Residual risks

2.1
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage remain.
The following dangers can arise in connec-
tion with the structure and design of this
product:
• Health defects resulting from vibration
emission if the product is being used
over long periods of time or not ade-
quately managed and properly
maintained.
• Injuries and damage to property due to
broken application tools or the sudden
impact of hidden objects during use.
• Danger of injury and property damage
caused by flying objects.

3. Before the first use

Remove the machine and all accessories
from the package. Keep the packaging
materials out of the reach of small children.
There is a danger of suffocation!

4. Contents of packing

1× Cordless weed sweeper
2× Metal brushes
1× Instruction manual

5. Intended use

The machine has been designed for the
removal of weeds from joints of pavement
and tiles. The machine removes weeds and
moss.
• This machine is intended for outdoor
private use.
• Compliance with the instructions for use
is a prerequisite for the proper use of the
machine. Instructions for use also con-
tain operating, maintenance and repair
instructions.
User is liable for all damage as a result of
improper use.
The machine comes standard with 2 metal
brushes.
Do not use the metal brush on soft stone
types or tiles with an imprint, the metal
brush may damage it. Always test a small,
inconspicuous part first to check whether or
not the metal brush damages the material
to be worked on.

6. Installation

Replacement of weed brush
6.1
(See Fig. A + A1).
PLEASE NOTE: The metal-brush is
sharp!
Always wear proper work gloves
when mounting and removing the
metal brush.
a. Press the shaft-locking button (10).
b. Remove the worn-out brush from the
machine.
c. Place the new brush (9) on the shaft.
d. Secure the brush with the snap rings
and wing nut and tighten them securely.
e. Release the shaft-locking button.
English
7